Page 14 - brochures

This is a SEO version of brochures. Click here to view full version

« Previous Page Table of Contents Next Page »

972K Wheel Loader Speci cations

Engine Weights Hydraulic System

Engine Model Cat ® C9.3 ACERT™ Operating Weight 26 212 kg 57,770 lb Steering System Piston

Pump Type Max. Gross Power 237 kW 318 hp • For 4.8 m 3 (6.3 yd 3 ) general purpose buckets

(1,800 rpm) – with BOCE. Implement System – 340 L/min 90 gal/min SAE J1995 Maximum Pump Max. Gross Power 322 hp Buckets Output (2,275 rpm)

(1,800 rpm) – Implement System – 31 000 kPa 4,496 psi

Bucket Capacities 2.90 m 3 - 3.75 yd 3 ­ SAE J1995 (metric) Maximum Operating

9.90 m 3 13.00yd 3 Pressure Max. Net Power 215 kW 288 hp

(1,800 rpm) – • Refer to bucket selection chart. Implement System – 300 L/min 79.3 gal/ ISO 9249 Optional 3rd Function min

Operating Speci cations Maximum Flow Max. Net Power 292 hp

(1,800 rpm) – Implement System – 20 700 kPa 3,000 psi Static Tipping Load 16 317 kg 35,963 lb ISO 9249 (metric) Optional 3rd Function Full 37° Turn –

Maximum Pressure Max. Net Power 215 kW 288 hp ISO 14397-1*

(1,800 rpm) – Hydraulic Cycle 5.9 Seconds Static Tipping Load 17 642 kg 38,884 lb SAE J1349 Time – Raise from Full 37° Turn –

Carry Position Max. Net Power 292 hp Rigid Tires**

(1,800 rpm) – Hydraulic Cycle 2.0 Seconds Breakout Force 196 kN 44,075 lb

SAE J1349 (metric) Time – Dump, at

• For 4.8 m 3 (6.3 yd 3 ) general purpose Maximum Raise Max. Net Power 215 kW 288 hp

buckets with BOCE.

(1,800 rpm) – Hydraulic Cycle 2.4 Seconds

* Full compliance to ISO (2007) 14397-1

EEC 80/1269 Time – Lower,

Sections 1 thru 6, which requires 2%

Empty, Float Down Max. Net Power 292 hp veri cation between calculations (1,800 rpm) – Hydraulic Cycle 10.3 Seconds and testing.

EEC 80/1269 (metric) Time – Total ** Compliance to ISO (2007) 14397-1

Peak Gross Torque 1426 Nm 1,051 ft-lb Sections 1 thru 5. • Cycle time with rated payload. (1,400 rpm) –

SAE J1995 Transmission Brakes

Peak Net Torque 1335 Nm 985 ft-lb

Forward 1 7.0 km/h 4.4 mph Brakes Meet OSHA, (1,400 rpm) –

SAE J1349 Forward 2 12.5 km/h 7.8 mph SAE J1473 OCT90

and ISO 3450-1985 Bore 115 mm 4.5 in Forward 3 21.4 km/h 13.3 mph

required standards Stroke 149 mm 5.9 in Forward 4 36.9 km/h 22.9 mph Displacement 9.3 L 568 in 3 Reverse 1 8.0 km/h 5.0 mph

Reverse 2 14.3 km/h 8.9 mph • Cat engine with ACERT Technology –

meets Tier 4 Interim/Stage IIIB emission Reverse 3 24.5 km/h 15.2 mph standards. Reverse 4 42.2 km/h 26.2 mph

• Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 826 mm (33 in) roll radius.

14

Page 14 - brochures

This is a SEO version of brochures. Click here to view full version

« Previous Page Table of Contents Next Page »