Page 15 - brochures

This is a SEO version of brochures. Click here to view full version

« Previous Page Table of Contents Next Page »

Axles Cab Service Re ll Capacities

Front Fixed Rear Oscillating

±13 degrees Maximum Single- 495 mm 19.5 in Wheel Rise and Fall

Tires

• Choose from a variety of tires to match your application. • Choices include:

26.5R25 VLT BS E3 Radial 26.5R25 VJT BS E3/L3 Radial 26.5R25 VMT BS L3 Radial 750/65R25 XLD L3T MX L3 Radial 26.5R25 XHA2 MX L3 Radial 26.5R25 XLD D1 MX L4 Radial 26.5R25 VSNT BS E4/L4 Radial 26.5R25 VSDL BS L5 Radial 26.5R25 XLDD2 MX L5 Radial 26.5R25 X MINE D2 MX L5 Radial Cat Flexport™

• NOTE: In certain applications (such as load and carry), the loader’s productive capabilities might exceed the tires’ tonnes-km/h (ton-mph) capabilities. Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. Other special tires are available on request.

ROPS/FOPS Meets SAE and

ISO standards • Cat cab with a four post integrated Rollover Protective Structure (ROPS) are standard in North America and Europe. • ROPS meets SAE J1040 APR88 and ISO 3471:1994 criteria.

• Falling Objects Protective Structure (FOPS) meets SAE J231 JAN81 and ISO:1992 Level II criteria.

Sound

• The sound values indicated below are for speci c operating conditions only. Machine and operator sound levels will vary at different engine and/or cooling fan speeds. Hearing protection may be needed when the machine is operated with a cabin that is not properly maintained, or when the doors and/or windows are open for extended periods or in a noisy environment. • The dynamic operator sound pressure level for a standard machine con guration, measured according to the procedures speci ed in “ISO 6396:2008”, is 69 dB(A) with a cooling fan speed set at 70 percent of the maximum value.

• The sound power level that is labeled on the machine is 108 LWA. The measurement of the sound power level was made according to the test procedures and conditions that are speci ed in the European Union Directive “2000/14/EC” as amended by “2005/88/EC”.

Fuel Tank – 381 L 101 gal Standard

Cooling System 66 L 17.4 gal Crankcase 24.5 L 6.5 gal Transmission 50 L 13.2 gal Differentials and 64 L 16.9 gal Final Drives – Front

Differentials and 64 L 16.9 gal Final Drives – Rear

Hydraulic Tank 198 L 52.3 gal

15

Page 15 - brochures

This is a SEO version of brochures. Click here to view full version

« Previous Page Table of Contents Next Page »