Page 18 - brochures

This is a SEO version of brochures. Click here to view full version

« Previous Page Table of Contents Next Page »

972K Wheel Loader Speci cations

Operating Specifications

Bucket Type

Edge Type

Capacity – Rated (§) m 3

yd 3

Capacity – Struck (§) m 3

yd 3

Width (§) mm

ft/in Dump Clearance at Maximum Lift and 45° Discharge (§) mm

ft/in Reach at Maximum Lift and 45° Discharge (§) mm

ft/in Reach at Level Lift Arm and Bucket Level (§) mm

ft/in Digging Depth (§) mm

in Overall Length mm

ft/in Overall Height with Bucket at Maximum Lift mm

ft/in Loader Clearance Circle with Bucket at Carry Position (§) mm

ft/in Static Tipping Load, Straight (ISO)* kg

lb Static Tipping Load, Straight (Rigid Tire)* kg

lb Static Tipping Load, Articulated (ISO)* kg

lb Static Tipping Load, Articulated (Rigid Tire)* kg

lb Breakout Force** (§) kN

lb Operating Weight* kg

lb

Material Handling – Pin On Bolt-On Teeth and Edges Segments

5.20 5.20 6.80 6.80 4.34 4.34 5.68 5.68 3220 3271 10'6" 10'8" 3049 2886 10'0" 9'5" 1356 1483 4'5" 4'10" 3114 3319 10'2" 10'10" 103 103 4" 4" 9288 9512 30'6" 31'3" 6265 6265 20'7" 20'7" 15 013 15 194 49'4" 49'11" 18 435 18 251 40,631 40,225 19 759 19 571 43,550 43,135 16 078 15 892 35,438 35,026 17 396 17 208 38,342 37,927 187 185 42,074 41,765 26 376 26 514 58,133 58,437

Material Handling – Fusion QC

Bolt-On Teeth and Bolt-On Teeth and Edges Segments Edges Segments

4.60 4.60 4.80 4.80 6.02 6.02 6.28 6.28 3.90 3.90 4.01 4.01 5.10 5.10 5.24 5.24 3220 3271 3220 3271 10'6" 10'8" 10'6" 10'8" 3069 2907 3048 2885 10'0" 9'6" 10'0" 9'5" 1336 1463 1357 1484 4'4" 4'9" 4'5" 4'10" 3085 3290 3115 3320 10'1" 10'9" 10'2" 10'10" 103 103 103 103 4" 4" 4" 4" 9259 9483 9289 9513 30'5" 31'2" 30'6" 31'3" 6199 6199 6231 6231 20'5" 20'5" 20'6" 20'6" 14 991 15 175 15 008 15 192 49'3" 49'10" 49'3" 49'11" 17 946 17 764 17 893 17 711 39,553 39,153 39,437 39,036 19 231 19 046 19 183 18 997 42,385 41,977 42,280 41,871 15 617 15 433 15 565 15 381 34,420 34,016 34,306 33,900 16 900 16 715 16 853 16 667 37,247 36,840 37,145 36,735 191 190 187 186 43,096 42,788 42,204 41,895 26 725 26 862 26 759 26 897 58,900 59,204 58,977 59,280

* Static tipping loads and operating weights shown are based on a machine configuration with Michelin 26.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.

** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C. *** Rock bucket specifications are given on Michelin 26.5R25 XLDD2 L5 Radial tires.

(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C governing loader ratings.

(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing. (Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.

18

Page 18 - brochures

This is a SEO version of brochures. Click here to view full version

« Previous Page Table of Contents Next Page »