Page 21 - brochures

This is a SEO version of brochures. Click here to view full version

« Previous Page Table of Contents Next Page »

Operating Specifications

Bucket Type

Edge Type Teeth

4.60 6.02 3.83 5.01 3294 10'9" 2961 9'8" 1483 4'10" 3266 10'8" 78 3" 9419 30'11" 6193 20'4" 15 145 49'9" 18 203 40,119 19 514 43,010 15 821 34,870 17 131 37,757 206 46,355 26 753 58,962

Capacity – Rated (§) m 3

yd 3

Capacity – Struck (§) m 3

yd 3

Width (§) mm

ft/in Dump Clearance at Maximum Lift and 45° Discharge (§) mm

ft/in Reach at Maximum Lift and 45° Discharge (§) mm

ft/in Reach at Level Lift Arm and Bucket Level (§) mm

ft/in Digging Depth (§) mm

in Overall Length mm

ft/in Overall Height with Bucket at Maximum Lift mm

ft/in Loader Clearance Circle with Bucket at Carry Position (§) mm

ft/in Static Tipping Load, Straight (ISO)* kg

lb Static Tipping Load, Straight (Rigid Tire)* kg

lb Static Tipping Load, Articulated (ISO)* kg

lb Static Tipping Load, Articulated (Rigid Tire)* kg

lb Breakout Force** (§) kN

lb Operating Weight* kg

lb

Material Handling with Backgrading Edge – Pin On

Teeth Teeth

4.80 4.97 6.28 6.50 4.02 4.17 5.26 5.45 3294 3294 10'9" 10'9" 2933 2911 9'7" 9'6" 1511 1532 4'11" 5'0" 3306 3336 10'10" 10'11" 78 78 3" 3" 9459 9489 31'1" 31'2" 6234 6265 20'6" 20'7" 15 168 15 185 49'10" 49'10" 18 105 18 040 39,904 39,761 19 423 19 363 42,809 42,677 15 724 15 661 34,657 34,517 17 041 16 983 37,559 37,430 200 195 44,948 43,951 26 821 26 865 59,112 59,209

General Purpose – Pin On Bolt-On Teeth and Edges Segments

4.20 4.20 5.49 5.49 3.70 3.70 4.84 4.84 3220 3271 10'6" 10'8" 3225 3071 10'6" 10'0" 1332 1470 4'4" 4'9" 2955 3160 9'8" 10'4" 103 103 4" 4" 9129 9353 30'0" 30'9" 5937 5937 19'6" 19'6" 14 925 15 104 49'0" 49'7" 18 770 18 589 41,371 40,971 20 088 19 903 44,274 43,866 16 396 16 213 36,138 35,734 17 706 17 521 39,024 38,616 210 208 47,189 46,880 26 223 26 361 57,795 58,099

* Static tipping loads and operating weights shown are based on a machine configuration with Michelin 26.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.

** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C. *** Rock bucket specifications are given on Michelin 26.5R25 XLDD2 L5 Radial tires.

(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C governing loader ratings.

(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing. (Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.

21

Page 21 - brochures

This is a SEO version of brochures. Click here to view full version

« Previous Page Table of Contents Next Page »