Page 20 - brochures

This is a SEO version of brochures. Click here to view full version

« Previous Page Table of Contents Next Page »

980K Wheel Loader Speci cations

Operating Specifications

Auxiliary Counterweight Change in Specs

1437 3,167 1546 3,408 1227 2,704 1342 2,958

693 1,528

Bucket Type

Edge Type

Capacity – Rated (§) m 3

yd 3

Capacity – Struck (§) m 3

yd 3

Width (§) mm

ft/in Dump Clearance at Maximum Lift and 45° Discharge (§) mm

ft/in Reach at Maximum Lift and 45° Discharge (§) mm

ft/in Reach at Level Lift Arm and Bucket Level (§) mm

ft/in Digging Depth (§) mm

in Overall Length mm

ft/in Overall Height with Bucket at Maximum Lift mm

ft/in Loader Clearance Circle with Bucket at Carry Position (§) mm

ft/in Static Tipping Load, Straight (ISO)* kg

lb Static Tipping Load, Straight (Rigid Tire)* kg

lb Static Tipping Load, Articulated (ISO)* kg

lb Static Tipping Load, Articulated (Rigid Tire)* kg

lb Breakout Force** (§) kN

lb Operating Weight* kg

lb

Material Handling with

Backgrading Light Material – Edge – Pin On Pin On

High Lift Change in Bolt-On Edges

Teeth Specs

5.59 8.20 7.31 10.73 4.98 6.47 6.51 8.46 3580 3638 11'8" 11'11"

3201 2917 220 10'6" 9'6" 8" 1464 1700 4'9" 5'6"

3043 3411 160 9'11" 11'2" 6" 74 108 2.9" 4.2"

9488 9883 201 31'2" 32'6" 8" 6486 6536 221 21'4" 21'6" 9" 15 954 16 234 175 52'5" 53'4" 7" 20 420 20 819 –1831 45,005 45,887 –4,036 21 744 22 238 –2026 47,925 49,012 –4,467 17 901 18 293 –1656 39,453 40,318 –3,651 19 082 19 567 –1836 42,058 43,125 –4,048 234 186 3 52,573 41,956 813 32 263 31 831 115 71,108 70,156 253

* Static tipping loads and operating weights shown are based on a machine configuration with Michelin 29.5R25 XLDD1 L4 Radial tires, full fluids, operator, standard counterweight, standard transmission, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.

** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C. *** Rock bucket specifications are given on Michelin 29.5R25 XLDD2 L5 Radial tires and are configured with side protectors. (§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C governing loader ratings.

(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing. (Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.

20

Page 20 - brochures

This is a SEO version of brochures. Click here to view full version

« Previous Page Table of Contents Next Page »