Page 12 - brochures

This is a SEO version of brochures. Click here to view full version

« Previous Page Table of Contents Next Page »

q Engine

• Model

Doosan DL08

“Common Rail” engine with direct fuel injection and electronic

control, 4 valves per cylinder, vertical injectors, water cooled, turbo compressor and air-air cooling of the intake air. The emission levels are well below the values required for

Phase III.

Two modes available: normal and economy.

• Number of cylinders 6 • Nominal power

162 kW (220 Ps) at 2.000 rpm (Din 6271) 162 kW (217 Hp) at 2.000 rpm (SAE J 1995) • Maximum power

169 kW (230 Ps) at 1.800 rpm (Din 6271) 169 kW (227 Hp) at 1.800 rpm (SAE J 1995) • Maximum torque

105 kgf.m (1.029 Nm) at 1.300 rpm • Piston displacement 7.640 cm 3

• Bore & stroke 108 mm x 139 mm • Starter

24 V / 6,6 kW • Batteries

2 x 12 V / 150 Ah • Air cleaner

Double element and pre-fltered Turbo with auto dust

evacuation. • Cooling

The hydraulic motor fan direction is reversible to facilitate

cleaning. The speed of rotation is automatically adjusted according to the temperature conditions encountered.

q Transmission

The “Power Shift” transmission can be used in manual mode, fully automatic or semi-automatic with the “kick down” function. This transmission is based on components of excellent reputation. It is equipped with a modulation system designed to protect it and ensure smooth gear and direction changes.

A manual transmission control lever is located to the left of the operator. In automatic or semi-automatic mode a change of direction function is also available.

The transmission can be disengaged by the brake pedal to make all the engine power available for the hydraulics. A safety device prevents the engine being started

if the transmission is not in neutral. The transmission can be tested and adjusted with special equipment. A computer can be connected to monitor the history of its operation.

• Gearbox ZF 4 WG 210 • Torque converter

Simple stage / mono phase • Movement speed, kph

Forward: 6,2 - 11,6 - 22,5 - 34,5 (1 - 2 - 3 - 4) Reverse: 6,4 - 12,2 - 23,8 (1 - 2 - 3) • Maximum traction 18,2 tonnes

q Lifting system

The type Z lifting system has a simple lifting piston system and is designed for the toughest jobs. The breakout force of 16,2 tonnes combines with a Bucket angle that is well maintained throughout the range of movement. The bucket angles are optimised in the travelling position and at ground level. The Load isolation system (LIS) is ftted as standard. It increases operator comfort and improves output.

• Lifting cylinders (2)

Bore x stroke: 150 mm x 831 mm • Tilting cylinders (1)

Bore x stroke: 190 mm x 495 mm

Technical specifcations


Page 12 - brochures

This is a SEO version of brochures. Click here to view full version

« Previous Page Table of Contents Next Page »