Komatsu D155AX-8 Dozer - page 16

Komatsu America Corp. is an authorized licensee of Komatsu Ltd.
Materials and specifications are subject to change without notice
, Komatsu Care
®
and KOMTRAX
®
are registered trademarks of Komatsu Ltd.
All other trademarks and service marks used herein are the property of Komatsu Ltd., Komatsu America Corp. or their respective owners or licensees.
Note: All comparisons and claims of
improved performance made herein are
made with respect to the prior Komatsu
model unless otherwise specifically stated.
AESS869-01
©2014 Komatsu America Corp.
10/14 (EV-1)
AD10(3M)OTP
Printed in USA
STANDARD EQUIPMENT FOR BASE MACHINE*
Air cleaner, double element with dust indicator
Alternator, 140 ampere/24V
Backup alarm
Batteries, 200 Ah/2 x 12V
Battery disconnect switch
Blade lift cylinders with double dust seal
Color monitor, LCD
Decelerator pedal
Engine hood
Engine idle auto shutdown with adjustable
timer
Engine intake centrifugal precleaner
Engine, gull-wing side covers
Engine shutdown secondary switch
Exhaust pipe with raincap
Fast fuel provision
Fenders
Front pull hook
Fuel pre-filter and primary filter
Grid heater starting aid in cold weather
High mount foot rests
Horn, warning
Hydraulic driven radiator cooling
fan with manual reverse clean mode
Hydraulics for dual tilt and pitch dozer
Hydraulics for ripper VGR/MSR
KOMTRAX
®
Level 5
K-bogie undercarriage
Komatsu Diesel Particulate Filter (KDPF)
Komatsu Variable Geometry Turbocharger
(KVGT)
Komatsu Selective Catalytic Reduction (SCR)
Locks, filler caps and covers
Oil pressure check ports for power train
PM service connector
Radiator mask, double door, heavy-duty,
hinged, perforated
Radiator reserve tank
Rear cover
ROPS cab (1420 kg,
3,131 lb
)**
Air conditioner/heater/defroster
– Pressurized
– Condenser remote mounted
Cab accessories
– 12V power supply (2 ports)
– Cup holder
– Rearview mirror
– Rear view monitoring (1 camera)
– AM/FM Radio w/remote AUX plug (3.5 mm)
– Lunch box holder
Work lights
– 2 front, hood mounted
– 2 front, cab mounted
– 2 rear, fender mounted
– 2 rear, cab mounted
– 1 rear, for ripper point
Seat, air suspension, fabric, heated, low back,
rotates 12.5° to right, headrest
Seat belt, 76 mm
3"
, retractable
Seat belt indicator
Sealed electrical connectors
Starting motor, 11.0 kW/24V
Steering system:
Hydrostatic Steering System (HSS)
Torque converter with auto lock-up
Track roller guards, end sections
Track shoe assembly
– Sealed and lubricated
610 mm
24
"
extreme service shoes
Transmission with auto/manual shift modes
Underguards, heavy duty
Hinged belly pans
Water separator, fuel
Wide core cooling package, 6 fins per inch
spacing
Variable multi-shank ripper
Additional weight (including hydraulic control unit): 3760 kg
8,290 lb
Beam length: 2320 mm
7'7"
Hydraulically-controlled parallelogram-type ripper with three shanks.
Digging angle infinitely adjustable.
Standard digging angle*: 49°
Maximum digging depth: 900 mm
2'11"
Maximum lift above ground: 950 mm
3'1"
Variable giant ripper
Additional weight (including hydraulic control unit): 2440 kg
5,380 lb
Beam length: 1400 mm
4'7"
Hydraulically-controlled parallelogram-type ripper with one shank.
Digging angle infinitely adjustable.
Standard digging angle*: 49°
Maximum digging depth: 1240 mm
4'1"
Maximum lift above ground: 950 mm
3'1"
* Measured with ripper point on ground and shank vertical.
Other
HD Counterweight 9-plate with rigid drawbar, 3568 kg
7,860 lb
Sigma push group (bladeless) for Allied blade
Dozer Equipment
SIGMADOZER
®
Full-U
Semi-U
OPTIONAL EQUIPMENT
* Dozer assembly and rear mounted
equipment are not included in base machine
standard equipment
** Cab meets OSHA/MSHA ROPS and FOPS
Level 2 standards
Note: Machine does not support aftermarket
grade control installations (Topcon/Trimble).
Shoes (optional)
Additional
weight
Ground contact
area
660 mm
26"
extreme service shoes
+240 kg
+530 lb
43230 cm
2
6,700 in
2
710 mm
28"
MS single-grouser shoes
No additional
46505 cm
2
7,208 in
2
Shoes
1...,6,7,8,9,10,11,12,13,14,15 16
Powered by FlippingBook